Universal gasket material for general industrial applications.
Gasket material for liquids and gases at lower pressure and temperatures.
Basis
Aramid fibres bonded with NBR.
Areas of application
Resistant to water and oil.
Typical technical data for thickness 2.0 mm
Compressibility ASTM F 36 J
%
8
Recovery ASTM F 36 J
%
55
Stress relaxation DIN 52913
50 MPa,16 h / 175 °C
MPa
24
KLINGER cold/hot compression
50 MPa
thickness decrease at 23 °C thickness decrease at 300 °C
% %
10 25
Tightness
DIN 3535/6
mg/s x m
0.1
Thickness increase after fluid immersion ASTM F 146
oil IRM 903: 5 h / 150 °C fuel B: 5 h / 20 °C
% %
5 7
Density
g/cm³
1.75
Dimensions of the standard sheets
Sizes
1000 x 1500 mm, 2000 x 1500 mm
Thicknesses
0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
Tolerances
Thickness acc. to DIN 28091-1 Length ±50 mm, Width ±50 mm
Other sizes, thicknesses and tolerances on request.
Function & Durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.
Downloads
Below you can find more product-related Information.
