Print this page 
Email this page
The Pack-RYT system is a
unique stuffing box sealing
arrangement that for the first
time incorporates a bearing and
flush channel system together.
The advantages of this system
are numerous and are listed
below for easy reference:
Klinger Limited is the appointed distributor for all SealRyt Corporation products within the Asia Pacific. For other compression packing products contact Klinger on 1300 79 82 79
Machined – in close – clearance bearing stabilises shaft.
- Cavitation caused deflection is minimised.
- Minimal clearance sharply throttles solids, which allows the low-flush to keep them out of the shaft area.
- Flush – use reduction averages 2/3.
Fewer sealing rings required.
- As few as two rings of packing required.
- Results in minimal friction to sleeve / shaft.
- Little, or in some cases, no leakage from gland.
- Eliminates need to constantly adjust packing.
- Marlo high performance, ultra pure heat conductive sealing rings can virtually eliminate sleeve/shaft wear.
High performance thermoplastic bearing block.
- The bearing material has a very high compressive strength.
- Is impervious to most chemicals.
- Virtually has no dimensional growth up to 260 Deg C.
- Split, pinned, drilled and tapped for easy installation and removal.
- Available as split bearing without lantern ring groove.
Automatically positions flush channel correctly.
- Lantern ring cannot move past flush inlet.
- Flush flow remains constant.
The Pack-RYT can be used on many applications and a few examples are:
- Vacuum Pumps
- Condensate Pumps
- Boiler Feed Pumps
- Hydra pulpers
- Bottom scrapers – in conjunction with Style 7413
- Screens
- Asphalt pumps
- River water pumps
- Fry oils
- Glue / Starch pumps
- Sewerage pumps
- Cooling tower pumps
- Fire water pumps
- Waste water pumps
- LP Feeders / HP Feeders
- Caustic pumps
- Pulp pumps
- Ash pumps
- Mixed juice pumps
- Raw juice pumps
- Syrup pumps
- Dry powders
- Animal fat
- Slurry pumps
- Lime pumps
- + many more